DRDKDASORTHO.COM :Back problems are one of the most common reasons to see a doctor. Approximately 80% of people will experience back pain during their lifetime. Fortunately, for the vast majority of these people the pain will subside naturally without the need for surgery.
However, for those with chronic conditions surgery may be an option.
Spinal fusion is a surgical procedure used to correct problems with the small bones of the spine (vertebrae). It is essentially a "welding" process. The basic idea is to fuse together the painful vertebrae so that they heal into a single, solid bone.
Spine surgery is usually recommended only when your doctor can pinpoint the source of your pain. To do this, your doctor may use imaging tests, such as x-rays, computed tomography (CT), and magnetic resonance imaging (MRI) scans.
Spinal fusion may relieve symptoms of many back conditions, including:
Degenerative disk disease
Spondylolisthesis
Spinal stenosis
Scoliosis
Fracture
Infection
Tumor
Spine surgery—whether back or neck surgery—is an advanced treatment option for pain and disability caused by an identifiable lesion in the patient’s anatomy that has not adequately improved with non-surgical treatments. Although spinal arthritis tends to be chronic, the symptoms are rarely progressive and rarely require surgery on the painful spinal joints. However, surgery may be needed in severe cases, and may include a spine fusion, decompression and/or laminectomy.
Many patients with lower back pain wonder if they will need surgery and if and when they should consult a surgeon. This website reviews a number of symptoms and considerations regarding when it may be advisable to consult with a spine surgeon.
Spine surgeons are physicians who receive special training in the diagnosis and treatment of the spine which include problems with the neck (cervical spine), mid back (thoracic spine) and low back (lumbar spine). We are proud to say that India has produced some of the best world renowned Spinal Surgeons and our associated Senior Spinal Surgeons working for their respective JCI Accredited Hospital are always eager to extend a supporting helpful hand to your spinal problems...
The latest techniques like Minimally invasive spine surgery, Expandable devices for Lumbar Spine Fusion are routinely carried out with results at par with the best centers globally.
For more information contact : 9971699333 or visit : http://www.drdkdasortho.com
Thursday, June 16, 2011
Spin Surgery
DRDKDASORTHO.COM :Back problems are one of the most common reasons to see a doctor. Approximately 80% of people will experience back pain during their lifetime. Fortunately, for the vast majority of these people the pain will subside naturally without the need for surgery.
However, for those with chronic conditions surgery may be an option.
Spinal fusion is a surgical procedure used to correct problems with the small bones of the spine (vertebrae). It is essentially a "welding" process. The basic idea is to fuse together the painful vertebrae so that they heal into a single, solid bone.
Spine surgery is usually recommended only when your doctor can pinpoint the source of your pain. To do this, your doctor may use imaging tests, such as x-rays, computed tomography (CT), and magnetic resonance imaging (MRI) scans.
Spinal fusion may relieve symptoms of many back conditions, including:
Degenerative disk disease
Spondylolisthesis
Spinal stenosis
Scoliosis
Fracture
Infection
Tumor
Spine surgery—whether back or neck surgery—is an advanced treatment option for pain and disability caused by an identifiable lesion in the patient’s anatomy that has not adequately improved with non-surgical treatments. Although spinal arthritis tends to be chronic, the symptoms are rarely progressive and rarely require surgery on the painful spinal joints. However, surgery may be needed in severe cases, and may include a spine fusion, decompression and/or laminectomy.
Many patients with lower back pain wonder if they will need surgery and if and when they should consult a surgeon. This website reviews a number of symptoms and considerations regarding when it may be advisable to consult with a spine surgeon.
For more information contact : 9971699333 or visit : http://www.drdkdasortho.com
However, for those with chronic conditions surgery may be an option.
Spinal fusion is a surgical procedure used to correct problems with the small bones of the spine (vertebrae). It is essentially a "welding" process. The basic idea is to fuse together the painful vertebrae so that they heal into a single, solid bone.
Spine surgery is usually recommended only when your doctor can pinpoint the source of your pain. To do this, your doctor may use imaging tests, such as x-rays, computed tomography (CT), and magnetic resonance imaging (MRI) scans.
Spinal fusion may relieve symptoms of many back conditions, including:
Degenerative disk disease
Spondylolisthesis
Spinal stenosis
Scoliosis
Fracture
Infection
Tumor
Spine surgery—whether back or neck surgery—is an advanced treatment option for pain and disability caused by an identifiable lesion in the patient’s anatomy that has not adequately improved with non-surgical treatments. Although spinal arthritis tends to be chronic, the symptoms are rarely progressive and rarely require surgery on the painful spinal joints. However, surgery may be needed in severe cases, and may include a spine fusion, decompression and/or laminectomy.
Many patients with lower back pain wonder if they will need surgery and if and when they should consult a surgeon. This website reviews a number of symptoms and considerations regarding when it may be advisable to consult with a spine surgeon.
For more information contact : 9971699333 or visit : http://www.drdkdasortho.com
Thoracic Spine
DRDKDASORTHO.COM :Back problems are one of the most common reasons to see a doctor. Approximately 80% of people will experience back pain during their lifetime. Fortunately, for the vast majority of these people the pain will subside naturally without the need for surgery.
However, for those with chronic conditions surgery may be an option.
Spinal fusion is a surgical procedure used to correct problems with the small bones of the spine (vertebrae). It is essentially a "welding" process. The basic idea is to fuse together the painful vertebrae so that they heal into a single, solid bone.
Spine surgery is usually recommended only when your doctor can pinpoint the source of your pain. To do this, your doctor may use imaging tests, such as x-rays, computed tomography (CT), and magnetic resonance imaging (MRI) scans.
Spinal fusion may relieve symptoms of many back conditions, including:
Degenerative disk disease
Spondylolisthesis
Spinal stenosis
Scoliosis
Fracture
Infection
Tumor
Spine surgery—whether back or neck surgery—is an advanced treatment option for pain and disability caused by an identifiable lesion in the patient’s anatomy that has not adequately improved with non-surgical treatments. Although spinal arthritis tends to be chronic, the symptoms are rarely progressive and rarely require surgery on the painful spinal joints. However, surgery may be needed in severe cases, and may include a spine fusion, decompression and/or laminectomy.
Many patients with lower back pain wonder if they will need surgery and if and when they should consult a surgeon. This website reviews a number of symptoms and considerations regarding when it may be advisable to consult with a spine surgeon.
For more information contact : 9971699333 or visit : http://www.drdkdasortho.com
However, for those with chronic conditions surgery may be an option.
Spinal fusion is a surgical procedure used to correct problems with the small bones of the spine (vertebrae). It is essentially a "welding" process. The basic idea is to fuse together the painful vertebrae so that they heal into a single, solid bone.
Spine surgery is usually recommended only when your doctor can pinpoint the source of your pain. To do this, your doctor may use imaging tests, such as x-rays, computed tomography (CT), and magnetic resonance imaging (MRI) scans.
Spinal fusion may relieve symptoms of many back conditions, including:
Degenerative disk disease
Spondylolisthesis
Spinal stenosis
Scoliosis
Fracture
Infection
Tumor
Spine surgery—whether back or neck surgery—is an advanced treatment option for pain and disability caused by an identifiable lesion in the patient’s anatomy that has not adequately improved with non-surgical treatments. Although spinal arthritis tends to be chronic, the symptoms are rarely progressive and rarely require surgery on the painful spinal joints. However, surgery may be needed in severe cases, and may include a spine fusion, decompression and/or laminectomy.
Many patients with lower back pain wonder if they will need surgery and if and when they should consult a surgeon. This website reviews a number of symptoms and considerations regarding when it may be advisable to consult with a spine surgeon.
For more information contact : 9971699333 or visit : http://www.drdkdasortho.com
Arthroscopy
DRDKDASORTHO.COM :Arthroscopy is reported to be a common orthopaedic procedure that is used to diagnose and treat problems in joints. The word arthroscopy comes from two Greek words: ‘artho’ meaning “joint”, and ‘scope’ meaning “look”.
Arthroscopy is undertaken using keyhole surgery, where a thin ‘scope’ is pushed into the joint (arthro-joint) to visualise the structures.
Arthroscopic surgery is most commonly performed on knee and shoulder joints, and less commonly on wrist, elbow, ankle and hip. Knee and shoulder joints are more amenable to arthroscopy because they are large enough for instruments to be manipulated around.
For more information contact : 9971699333 or visit : http://ping.fm/viRUl
Arthroscopy is undertaken using keyhole surgery, where a thin ‘scope’ is pushed into the joint (arthro-joint) to visualise the structures.
Arthroscopic surgery is most commonly performed on knee and shoulder joints, and less commonly on wrist, elbow, ankle and hip. Knee and shoulder joints are more amenable to arthroscopy because they are large enough for instruments to be manipulated around.
For more information contact : 9971699333 or visit : http://ping.fm/viRUl
Renowned Joint replacement Surgeon in India
DRDKDASORTHO.COM :Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/ZvDh3
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/ZvDh3
Joint Replacement in Delhi
DRDKDASORTHO.COM :Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/9wcoc
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/9wcoc
Famous Joint Replacement in Delhi
DRDKDASORTHO.COM :Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/YHLJW
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/YHLJW
Joint Replacement Surgeon in Delhi
DRDKDASORTHO.COM :Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/a0Hd8
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/a0Hd8
Joint Replacement Surgeon in India
DRDKDASORTHO.COM :Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/PLtN4
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/PLtN4
Hip Replacement Surgeon
DRDKDASORTHO.COM :Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/kMf3q
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/kMf3q
Hip Pain
DRDKDASORTHO.COM :Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/7Z8nW
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/7Z8nW
Deformity
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/hxoor
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/hxoor
Knee swelling
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/4pYKv
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/4pYKv
Knee surgeries
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/rHbB5
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/rHbB5
Knee Replacements
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/Cvsko
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/Cvsko
Replacement Knee
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/1uInR
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/1uInR
Knee Replace
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/wn5Ja
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/wn5Ja
100% Result Oriented Treatment for Knee Pain
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/U1Q1Q
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/U1Q1Q
Knee Pain
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/cpA9j
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/cpA9j
Knee Replacement Surgeon
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/4mSPT
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/4mSPT
Knee Replacement Surgeon in Delhi
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/VLSOD
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/VLSOD
Knee Replacement Surgeon in India
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/t60JZ
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/t60JZ
Knee Replacement
DRDKDASORTHO.COM: The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/IuYkm
What are the benefits of total knee replacement?
The direct benefits of replacing the knee joint include:
• The relief of pain and in some cases eliminates it all together.
•Improves mobility
• Corrects deformity
• The indirect benefits are just as important and, by restoring the ability to walk and function, knee replacement allows you to improve your fitness and improve the quality of your life.
At surgery, an incision measuring about 8 to 10 inches long will be made either on the front or side of your knee. The surgeon, Dr. D.K. Das will remove small amounts of worn bone from the lower end of your femur and the upper end of your tibia, so that flat surfaces can be created to fasten your new prosthesis to. Some patients require computer navigation to ensure optimal fit. Once your surgeon is satisfied that the prosthesis fits properly it will be secured in place. Please not that only the world’s best and most preferred brand of prosthesis will be used to avoid any post-operation hitches. When your surgeon is ready to close the incision, a tube may be inserted to drain excess fluid.
All operations carry risks and total knee replacement is no exception. Risks vary according to your general health.
For more information contact : 9971699333 or visit : http://ping.fm/IuYkm
Monday, June 13, 2011
Arthroscopy
DRDKDASORTHO.COM :Arthroscopy is reported to be a common orthopaedic procedure that is used to diagnose and treat problems in joints. The word arthroscopy comes from two Greek words: ‘artho’ meaning “joint”, and ‘scope’ meaning “look”.
Arthroscopy is undertaken using keyhole surgery, where a thin ‘scope’ is pushed into the joint (arthro-joint) to visualise the structures.
Arthroscopic surgery is most commonly performed on knee and shoulder joints, and less commonly on wrist, elbow, ankle and hip. Knee and shoulder joints are more amenable to arthroscopy because they are large enough for instruments to be manipulated around.
For more information contact : 9971699333 or visit : http://ping.fm/JMPdt
Arthroscopy is undertaken using keyhole surgery, where a thin ‘scope’ is pushed into the joint (arthro-joint) to visualise the structures.
Arthroscopic surgery is most commonly performed on knee and shoulder joints, and less commonly on wrist, elbow, ankle and hip. Knee and shoulder joints are more amenable to arthroscopy because they are large enough for instruments to be manipulated around.
For more information contact : 9971699333 or visit : http://ping.fm/JMPdt
Sunday, June 12, 2011
Fracture Management
DRDKDASORTHO.COM :Back problems are one of the most common reasons to see a doctor. Approximately 80% of people will experience back pain during their lifetime. Fortunately, for the vast majority of these people the pain will subside naturally without the need for surgery.
However, for those with chronic conditions surgery may be an option.
Spinal fusion is a surgical procedure used to correct problems with the small bones of the spine (vertebrae). It is essentially a "welding" process. The basic idea is to fuse together the painful vertebrae so that they heal into a single, solid bone.
Spine surgery is usually recommended only when your doctor can pinpoint the source of your pain. To do this, your doctor may use imaging tests, such as x-rays, computed tomography (CT), and magnetic resonance imaging (MRI) scans.
Spinal fusion may relieve symptoms of many back conditions, including:
Degenerative disk disease
Spondylolisthesis
Spinal stenosis
Scoliosis
Fracture
Infection
Tumor
Spine surgery—whether back or neck surgery—is an advanced treatment option for pain and disability caused by an identifiable lesion in the patient’s anatomy that has not adequately improved with non-surgical treatments. Although spinal arthritis tends to be chronic, the symptoms are rarely progressive and rarely require surgery on the painful spinal joints. However, surgery may be needed in severe cases, and may include a spine fusion, decompression and/or laminectomy.
Many patients with lower back pain wonder if they will need surgery and if and when they should consult a surgeon. This website reviews a number of symptoms and considerations regarding when it may be advisable to consult with a spine surgeon.
Spine surgeons are physicians who receive special training in the diagnosis and treatment of the spine which include problems with the neck (cervical spine), mid back (thoracic spine) and low back (lumbar spine). We are proud to say that India has produced some of the best world renowned Spinal Surgeons and our associated Senior Spinal Surgeons working for their respective JCI Accredited Hospital are always eager to extend a supporting helpful hand to your spinal problems...
The latest techniques like Minimally invasive spine surgery, Expandable devices for Lumbar Spine Fusion are routinely carried out with results at par with the best centers globally.
For more information contact : 9971699333 or visit : http://www.drdkdasortho.com
However, for those with chronic conditions surgery may be an option.
Spinal fusion is a surgical procedure used to correct problems with the small bones of the spine (vertebrae). It is essentially a "welding" process. The basic idea is to fuse together the painful vertebrae so that they heal into a single, solid bone.
Spine surgery is usually recommended only when your doctor can pinpoint the source of your pain. To do this, your doctor may use imaging tests, such as x-rays, computed tomography (CT), and magnetic resonance imaging (MRI) scans.
Spinal fusion may relieve symptoms of many back conditions, including:
Degenerative disk disease
Spondylolisthesis
Spinal stenosis
Scoliosis
Fracture
Infection
Tumor
Spine surgery—whether back or neck surgery—is an advanced treatment option for pain and disability caused by an identifiable lesion in the patient’s anatomy that has not adequately improved with non-surgical treatments. Although spinal arthritis tends to be chronic, the symptoms are rarely progressive and rarely require surgery on the painful spinal joints. However, surgery may be needed in severe cases, and may include a spine fusion, decompression and/or laminectomy.
Many patients with lower back pain wonder if they will need surgery and if and when they should consult a surgeon. This website reviews a number of symptoms and considerations regarding when it may be advisable to consult with a spine surgeon.
Spine surgeons are physicians who receive special training in the diagnosis and treatment of the spine which include problems with the neck (cervical spine), mid back (thoracic spine) and low back (lumbar spine). We are proud to say that India has produced some of the best world renowned Spinal Surgeons and our associated Senior Spinal Surgeons working for their respective JCI Accredited Hospital are always eager to extend a supporting helpful hand to your spinal problems...
The latest techniques like Minimally invasive spine surgery, Expandable devices for Lumbar Spine Fusion are routinely carried out with results at par with the best centers globally.
For more information contact : 9971699333 or visit : http://www.drdkdasortho.com
Thoracic Spine
DRDKDASORTHO.COM :Back problems are one of the most common reasons to see a doctor. Approximately 80% of people will experience back pain during their lifetime. Fortunately, for the vast majority of these people the pain will subside naturally without the need for surgery.
However, for those with chronic conditions surgery may be an option.
Spinal fusion is a surgical procedure used to correct problems with the small bones of the spine (vertebrae). It is essentially a "welding" process. The basic idea is to fuse together the painful vertebrae so that they heal into a single, solid bone.
Spine surgery is usually recommended only when your doctor can pinpoint the source of your pain. To do this, your doctor may use imaging tests, such as x-rays, computed tomography (CT), and magnetic resonance imaging (MRI) scans.
Spinal fusion may relieve symptoms of many back conditions, including:
Degenerative disk disease
Spondylolisthesis
Spinal stenosis
Scoliosis
Fracture
Infection
Tumor
Spine surgery—whether back or neck surgery—is an advanced treatment option for pain and disability caused by an identifiable lesion in the patient’s anatomy that has not adequately improved with non-surgical treatments. Although spinal arthritis tends to be chronic, the symptoms are rarely progressive and rarely require surgery on the painful spinal joints. However, surgery may be needed in severe cases, and may include a spine fusion, decompression and/or laminectomy.
Many patients with lower back pain wonder if they will need surgery and if and when they should consult a surgeon. This website reviews a number of symptoms and considerations regarding when it may be advisable to consult with a spine surgeon.
For more information contact : 9971699333 or visit : http://www.drdkdasortho.com
However, for those with chronic conditions surgery may be an option.
Spinal fusion is a surgical procedure used to correct problems with the small bones of the spine (vertebrae). It is essentially a "welding" process. The basic idea is to fuse together the painful vertebrae so that they heal into a single, solid bone.
Spine surgery is usually recommended only when your doctor can pinpoint the source of your pain. To do this, your doctor may use imaging tests, such as x-rays, computed tomography (CT), and magnetic resonance imaging (MRI) scans.
Spinal fusion may relieve symptoms of many back conditions, including:
Degenerative disk disease
Spondylolisthesis
Spinal stenosis
Scoliosis
Fracture
Infection
Tumor
Spine surgery—whether back or neck surgery—is an advanced treatment option for pain and disability caused by an identifiable lesion in the patient’s anatomy that has not adequately improved with non-surgical treatments. Although spinal arthritis tends to be chronic, the symptoms are rarely progressive and rarely require surgery on the painful spinal joints. However, surgery may be needed in severe cases, and may include a spine fusion, decompression and/or laminectomy.
Many patients with lower back pain wonder if they will need surgery and if and when they should consult a surgeon. This website reviews a number of symptoms and considerations regarding when it may be advisable to consult with a spine surgeon.
For more information contact : 9971699333 or visit : http://www.drdkdasortho.com
Arthroscopy
DRDKDASORTHO.COM :Arthroscopy is reported to be a common orthopaedic procedure that is used to diagnose and treat problems in joints. The word arthroscopy comes from two Greek words: ‘artho’ meaning “joint”, and ‘scope’ meaning “look”.
Arthroscopy is undertaken using keyhole surgery, where a thin ‘scope’ is pushed into the joint (arthro-joint) to visualise the structures.
Arthroscopic surgery is most commonly performed on knee and shoulder joints, and less commonly on wrist, elbow, ankle and hip. Knee and shoulder joints are more amenable to arthroscopy because they are large enough for instruments to be manipulated around.
For more information contact : 9971699333 or visit : http://ping.fm/k7MBV
Arthroscopy is undertaken using keyhole surgery, where a thin ‘scope’ is pushed into the joint (arthro-joint) to visualise the structures.
Arthroscopic surgery is most commonly performed on knee and shoulder joints, and less commonly on wrist, elbow, ankle and hip. Knee and shoulder joints are more amenable to arthroscopy because they are large enough for instruments to be manipulated around.
For more information contact : 9971699333 or visit : http://ping.fm/k7MBV
Famous Joint Replacement in Delhi
DRDKDASORTHO.COM :Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/VerYz
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/VerYz
Joint Replacement Surgeon in India
DRDKDASORTHO.COM :Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/ebeAO
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/ebeAO
Joint Replacement Surgeon
DRDKDASORTHO.COM :Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/UsUF4
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/UsUF4
Hip Replacement Surgeon
DRDKDASORTHO.COM :Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/j0P0W
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
Total hip replacement surgery is one of the most common orthopedic procedures. Because of the long history of hip replacement surgery, this procedure has become a safer and more reliable method to treat severe hip arthritis pain. Hip replacement is a medical procedure in which the hip joint is replaced by a synthetic implant. It is the most successful, cheapest and safest form of joint replacement surgery.
How is hip replacement performed?
Hip replacement surgery involves replacing the femoral head - the "ball" of your thighbone - with a metal ball. The metal ball attaches to a metal stem that fits into your thighbone. A plastic and metal socket is implanted into your pelvic bone to replace the damaged socket. The prosthetic parts, which mimic the natural design of your hip, fit together and function like a normal hip joint.
Artificial hip joints come in many varieties. Generally your surgeon decides which hip joint is the best for you. Materials used in making the prostheses include a combination of durable, wear-resistant plastic and metals, including stainless steel and titanium. Implants are biocompatible - meaning they're designed to be accepted by your body - and they're made to resist corrosion, degradation and wear.
Hip replacement surgery usually takes two to three hours, during which time you'll be under general or regional anesthesia. During the operation, the surgeon separates your thighbone from the socket. Working between the large hip muscles, the surgeon removes the diseased or damaged bone and tissue, leaving healthy bone and tissue intact. The artificial socket is pressed into place. The top end of the thighbone is hollowed out to allow insertion of the metal stem with the attached ball. The ball and the socket join to form the new hip joint.
After surgery you're moved to a recovery area for a few hours while your anesthesia wears off. Nurses or other anesthesia aides watch your blood pressure, pulse, alertness, pain or comfort level and your need for medications.
For more information contact : 9971699333 or visit : http://ping.fm/j0P0W
Knee swelling
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/9Cvu1
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/9Cvu1
Knee surgeries
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/PQGZT
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/PQGZT
Deformity
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/MdcOK
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/MdcOK
Replacement Knee
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/UVxP1
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/UVxP1
Knee arthroplasty
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/0Qdsu
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/0Qdsu
Knee Replacements
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/DEje1
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/DEje1
100% Result Oriented Treatment for Knee Pain
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/JSdYY
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/JSdYY
Knee Pain
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/sJhbE
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/sJhbE
Knee Replacement Surgeon
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/xWqO6
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/xWqO6
Knee Replacement Surgeon in Delhi
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/HsvmU
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/HsvmU
Knee Replacement Surgeon in India
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/gk2l2
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/gk2l2
Knee Replacement
DRDKDASORTHO.COM :The knee joint is formed by the lower end of the thigh bone (femur) and the upper end of the shin bone (tibia). The knee cap (patella) sits in the tendon of the quadriceps muscle, which is connected to the tibia by the patella tendon. It forms a third joint with the femur. Arthritis is a degenerative condition of the cartilage on the surface of a joint. The cartilage normally provides a low friction, impact resistant, bearing that contributes to efficient pain free stability in posture and locomotion. High pressure or repetitive loading can damage cartilage, like any other tissue or material.
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/cpc7J
Why do I need a Knee replacement?
Most serious knee problems occur when the cushioning cartilage of the knee joint begins to wear out. When this happens the bones of the knee will eventually rub together causing stiffness and pain.
The knee replacement operation is designed to relieve pain and enable you to improve your movement and make activity easier. Your doctor will always try other treatments first before they consider surgery, such as painkilling tablets.
What is a total knee replacement?
This is where the worn out surfaces of the bone that make up the knee joint are replaced with metal and plastic components. With the new joint it is the interlocking shapes of the metal and plastic replacements that give the knee its stability. The new joint aims to relieve pain and decrease stiffness, allowing you improved mobility and flexion within the knee.
For more information contact : 9971699333 or visit : http://ping.fm/cpc7J
Subscribe to:
Comments (Atom)